What is mold remediation?

Mold remediation in Philadelphia is the process of cleaning up and removing mold, in particular, toxic mold, from homes, schools, offices, etc. In cases where there is scant evidence of mold it can usually be cleaned up by the homeowner or the building management but if the mold is widespread it is better to hire professional mold removal technicians as they have all the necessary equipment and skills that are needed to remove it safely and completely.

Once mold has been identified in a structure it must be removed and the cause must be found and corrected to ensure that it does not recur. The mold experts in mold remediation in Philadelphia will need to take positive steps in changing the conditions which have caused the mold growth in the first place and then attack the cleanup and removal. Regardless of who does the work, the building owner or a team of professionals it is important to take precautions before starting the task.

Mold is caused by moisture that has formed in an area, this moisture can be the results of high humidity, a leaking pipe or plumbing fixture or any other source of water. The first step is to find the source of the moisture and eliminate it. Mold forms very quickly, once there is a source of moisture within 24 to 48 hours you can expect to see the first signs of mold. The source of the water must be rectified and the area must be dried before effective removal can start. Mold remediation is of no value if the causes of mold are not dealt with as it will just return.

The individuals who deal with mold remediation must take personal precautions before they begin removing it. Toxic mold can be the cause of health problems, especially respiratory and this is why protection is important. All exposed skin should be covered, eye protection must be worn and a respirator or face mask must be worn to eliminate the possibility of breathing in the mold spores. The professionals wear disposable coveralls as everything that comes into contact with the mold needs to be disposed of as does the mold itself; seal everything in a plastic bag before you remove it from the area otherwise the mold may contaminate someplace else as it is being moved.

Depending on the size of the area which has become contaminated, mold remediation in Philadelphia can take anywhere from a few hours to a few days to be completed, a lot has to do with how wet the area is and the problems associated with eliminating the water source.

Be the first to like.

Share

    Add Comment

    ten − 2 =

    Pin It on Pinterest

    Shares
    Share This